eSync 2
Synchronization and Time Code for your motion capture data, link up to almost any signal or source. Only one eSync 2 is needed per mocap system. Learn More ➝
Documents
Compatible Products
Prime Series
Cameras
S250e
Cameras
Motive
ARENA
Body & Prop Mocap
Expression
Face Mocap
Tracking Tools
6DoF Object Tracking
Camera SDK
Tech Specs
Size & Weight
- Width: 5.47 inches (138.9 mm)
- Height: 1.61 inches (40.9 mm)
- Depth: 3.64 inches (92.5 mm)
- Weight: 13 ounces (0.4 kg)
Power
- IEEE 802.3af-2003 PoE
- Optionally, use the included 12V @ 0.6A power supply (US/EU-compatible) if no PoE port available
Ethernet Port
- 1000BASE-T Ethernet
- Cat6 Ethernet cabling (Cat5/Cat5e/etc not supported)
Status LEDs
- Per port activity status
- Master time
- External lock
Recording Control
- Start/stop trigger
- Rising edge
- Falling edge
- High gated
- Low gated
Common Sync Parameters
- Max input freq : 50 kHz
- Min input freq : 10 Hz
- Divider ( 1:1 to 1:1024 )
- Sync modes
- Rising edge
- Falling edge
- Either edge
- Sync Offset (up to one frame period)
- Sync Rate : 30 to 360 Hz
Sync Input Sources
- Internal Clock
- Video Genlock
- SMPTE Time Code
- External digital inputs
- Isolated
- High Impedance (x3)
- VESA Stereo
External Sync Input
- Isolated
- Electrically-isolated, (LV)TTL compatible
- VIL (max) : 1.0V
- VIH (min) : 3.0V
- VIH (max) : 12V
- High Impedance and VESA Stereo
- VIL (max) : 0.8V
- VIH (min) : 2V
- VIH (max) : 3.3V
- ZIN : 4.7Kohm
Sync Out Sources
- Internal Clock
- All external digital inputs
- Recording active, level for duration
- Recording active, pulse per frame
- Recording active, start/stop pulse
- Exposure periods
- Polarity
- Normal
- Inverted
External Sync Outputs
- Four BNC outputs, 1 VESA Stereo Output
- LVCMOS 3.3V
- IOH (max) : -8mA
- IOL (max) : 8mA
In the Box
- 1 eSync 2 Part number: OPTESY2
- 1 12V universal power supply (US/EU-compatible)
- 2 Mounting tabs (removable)
- 3 BNC male to RCA female adapters
- 4 Rubber feet
- 4 Velcro straps
- 1 eSync 2 quick start guide
