Cables & Connectors
Shielded Cat 6a Cable
This shielded Category 6a Ethernet cable is required for Ethernet camera systems with 10 Gb uplink connections (using NETGEAR ProSafe GSM7228S and Intel X540-T1). Shielded cables are recommended for harsh EMI environments and CE compliance.
USB Camera Cable - Down Angle
Standard-A plug to Mini-B plug
For connecting cameras to hubs. This down angled Mini-B plug routes the cable to the back of the camera to avoid interfering with objects on the port side of the device. This is the recommended cable for most mocap setups involving truss or tripods.
USB Camera Cable - Straight
Standard-A plug to Mini-B plug
For connecting cameras to hubs. This straight Mini-B plug routes the cable out the side of the camera to avoid interfering with objects directly behind the device. This cable is recommended for tight mounting situations or when the rear-facing down angle cable will not work.
USB Uplink Cable
Standard-A plug to Standard-B plug
For connecting hubs to a computer.
USB Active Extension Cable
Standard-A plug to Standard-A receptacle
For extending the reach of USB hubs. This allows OptiTrack cameras to be located farther from the computer for larger capture volume sizes. Up to two cables can be used in series for longer distances.
These cables do not plug directly into OptiTrack USB cameras.
Sync Cable
RCA plug to RCA plug
Used to synchronize OptiTrack's USB systems. For V100 and mixed systems, 1 cable is required per camera. For V100:R2 systems with OptiHubs, only the hubs need to be connected with a sync cable.
Compatible Cameras:
Flex 3 (V100:R2)
Sync Cable Splitter $7
Replacement splitter cable that breaks out sync input and output in V100 and mixed USB camera systems.
Compatible Cameras:
Flex 3 (V100:R2)
Slim 3U Breakout Cable $50
V120:SLIM break-out cable for camera synchronization and access to camera signals.
Compatible Cameras:
V120:SLIM
Slim 3U Custom Breakout Connector $35
V120:SLIM bare 9-pin connector for custom break-out of camera signals.
Compatible Cameras:
V120:SLIM
Slim 3U Custom Breakout Connector Case $20
Cover case for V120:SLIM Custom Breakout Connector (bare 9-pin connector).